Skip to main content

Loom

Técnica
Capuchinhas, Castro Daire ©DGARTES/Lino Silva/2022

There are looms of various designs and sizes, on which the ‘warp’ is stretched, along with a complex set of components required for the production of fabrics, blankets or rugs. Traditional looms in Portugal include the treadle loom, the vertical loom and the frame loom. The treadle loom is the most common and can be divided into two-shaft or four-shaft looms. Looms are characterised by the number of ‘ramos’ they have, which serve as a unit of measurement for the width of the fabrics produced. A large loom ('tear de ramos grande') allows for the production of fabric up to 1.65 metres wide. A small loom ('tear de ramos pequeno') allows for weaving 50-centimetre-wide strips, which can then be sewn together to form larger items such as bedspreads and blankets.

The warp is the set of threads stretched across the loom’s frame. The first stage of the work involves preparing the threads on the warping frame, where the thread is stretched out to form two alternating rows that allow the weft to be interlaced, prior to being mounted on the loom. Warping is one of the most complex tasks in the process and is reserved for the master weavers. The warp yarn must be strong. Since cotton became available on the market, the warp yarn has often been made solely of cotton, or a blend of cotton with wool or linen, making it stronger. Placing the warp on the loom requires a high level of expertise.

The 'liços' (heddles) are fitted to the warp threads and are operated by pedals that lower or raise them depending on the selection of threads to be woven, resulting in two layers of threads, an upper and a lower layer. The gap created by the movement of the heddles is called 'cala' (shed). The size and complexity of some looms mean that the heddles must be operated by two people. The most complex pieces, featuring designs and patterns, are woven on looms with multiple heddles, the number of which increases in line with the complexity of the design.

The weft consists of threads passed between the warp threads with the aid of a 'lançadeira' (shuttle), a piece of wood or metal that carries the 'canela' (bobbin) holding the thread. Preparation for this stage involves ‘filling’ the bobbin, winding the thread around an empty section using a ‘caneleiro’ (bobbin winder).

The 'pente' (reed) is another essential component of the loom, consisting of a strip to which a row of small vertical rods made of wood, cane or metal is attached forming a sort of comb, through which the warp threads pass. It is used to tighten each new weft thread between the shuttle’s passes, beating the weft into place in order to achieve the desired tightness in the fabric.

  

Bibliography

  • IEFP – Instituto do Emprego e Formação Profissional. (2009). Fios. Formas e memórias dos tecidos, rendas e bordados. 
  • LIMA, Rui de Abreu de. (1998). Artesanato tradicional português. IV – Madeira. Lisboa: Edição do Autor.
  • MEDEIROS, Carlos Laranjo; LOPES, Filomena. (2000). Tecelagem Tradicional: Motivos e Padrões. Lisboa: Livros e Leituras. 
  • PERDIGÃO, Teresa; CALVET, Nuno. (2002). Tesouros do Artesanato Português. Volume II – Têxteis. Lisboa | São Paulo: Editorial Verbo.

gallery

Learn more

Itinerary: Wool Blankets and Throws

Travelling with the warmth of weaving.

Itinerary: Weaving